Measuring systems are designed to control pressure in hydraulic and pneumatic installations. Our company offers complete measuring sets or single elements such as hoses, couplings, measuring nipples or pressure gauges.
Shop
Showing 106–120 of 285 results
-
Industrial Hoses
General Purpose Hoses
General purpose hoses are used in a wide variety of applications: for water, air, oil and fuel or slightly aggressive chemicals. This range comprises hoses made of PCV (polyvinyl chloride), rubber hoses and hoses made of many other materials. Some hoses, those compliant with hygiene requirements, can be also used to transfer foodstuffs. The hoses, however, shall always be used according to the recommendations given in the catalogue.
SKU: n/a -
Industrial Fittings
Guillemin Symetrical Couplings
GUILLEMIN couplings are intended for application in industrial installations transferring, loading and unloading liquid and dry loose substances. The couplings were first designed in France and are compliant with EN 14420-8 / NF E 29-572. Simple and easy connection is the key to their popularity. Two identical halves with two lugs are closed just by putting them together with the seals facing each other and by turning the locking rings so that the lugs are securely engaged. To tighten the connection, turn the locking rings with a hook wrench for Guillemin couplings by 1/4 a turn.
SKU: n/a -
UHP Pressure Regulators
High Purity Drastar Regulators (UHP)
DRA100 Series is an UHP low pressure reducing regulator with B.A. 25Ra, E.P. 10Ra, or E.P. 5Ra surface finish and applicable for high purity semiconductor manufacturing, specialty gas, and bulk gas lines as well as other facilities. Inlet pressures are 3000psig (210bar) or 600psig (42bar) and outlet pressure are 5psig(0.3bar) up to 250psig (17bar).
★ 1/4”, 3/8”, 1/2”, and 3/4” VCR type
★ Non-tied diaphragm type
★ Surfaces finishes to B.A. 25Ra, E.P. 10 Ra or E.P. 5 Ra microinch
★ Push and lock type handle (DRASTAR patent #10-1086199) mounted
★ Threadless type: enhanced particle prevention by adopting the locking-plate seal system (DRASTAR patent #10-0753280)
★ All works of welding, assembly, test and cleaning are performed in class 100 and class 10 clean-rooms
★ Design proof pressure: 150% of maximum rated
★ Applicable for Semiconductor manufacturing, specialty gases, bulk gas line and other facilitiesWith DRASTAR’s patented (patent #1086199) “push and lock type handle”, you can operate it easily and stably; “locking” by pushing down the handle will prevent any slight change of pre-set pressure value, which could possibly be caused by any vibration from gas pipeline or ambient applications and the other way “unlocking” by pulling it back enables you to adjust the pressure value freely again.
#UHP Regulators for Diamond
SKU: n/a -
Hose and Tube Assembling Machines
Hose Crimping Machines
Lillbacka Powerco Oy was established in 1969 in Finland. First models of crimping machines launched in the early seventies turned out to be a great success. The crimping machines under the brand name of Finn-Power are sold around the world. Generally, all leading producers of high pressure hose assemblies and industrial hose assemblies rely on hydraulic crimping machines and Finn-Power is the natural choice. But apart from those applications, the crimping machines are also used in such fields as: car parts production, construction equipment, heavy machinery, railway engineering, shipbuilding, transmission of electricity, pipes, wire and electric cables production.
SKU: n/a -
Hose and Tube Assembling Machines
Hose Cutting Machines
Cutting machines, with electric drive, designed to cut hydraulic hoses with steel or textile braid as well as some industrial hoses. Equipped with standard (smooth) or toothed cutting blades with 2900 r.p.m. speed of rotation. Hose is manually (lever), pneumatically or hydraulically (foot-lever) pressed against the blade. The most important cutting machines parameters are: hose external diameter, type of hose to be cut, type of motor, drive and available accessories such as e.g. hose boss, cuts counter and length measuring unit. Automatic machines, that cut a certain length of the hose, are used for multi series production.
SKU: n/a -
Hose and Tube Assembling Machines, Measuring systems and pressure gauges
Hose Skiving and Fitting Inserting Machines
Hose and Tube Assembling Machines, Measuring systems and pressure gaugesHose Skiving and Fitting Inserting Machines
Skiving of external or internal layer of certain types of hydraulic rubber hoses is needed before crimping takes place. For that purpose simple manual or semi-automatic skiving machines were developed
SKU: n/a -
Hose and Tube Assembling Machines
Hose Testing Benches
Testing of hydraulic hose assemblies with static pressure is a final hose assembly inspection for leak tightness and strength. For standard testing of hydraulic hoses 2 x working pressure is applied. Testing is conducted with static pressure and lasts for a dozens of seconds. Testing can be conducted on a part or 100% of certain production series.
SKU: n/a -
Hydraulics and High Pressure
Hydraulic Fittings and Ferrules
Thermoplastic hoses are designed for pressure not exceeding 800 bar. External layer manufactured from abrasion resistant polyurethane, internal layer of polyether or polyamide reinforced by max 3 layers of steel or aramid braid. Widely used in hydraulic systems, rescue equipment, lifts and pumps for hydraulic oil, paints, solvents, isocyanines and polyols.
SKU: n/a -
Hydraulics and High Pressure, Uncategorized
Hydraulic Fittings and Ferrules
Fittings for high pressure hoses are assembled on hydraulic hoses with the use of special ferrules. Designed especially for rubber hydraulic hoses and thermoplastic hoses but widely used for industrial hoses as well. Assembled by screwing (reusable) or on crimping machines (permanent connection). Our offer includes a wide range of fitting types – depending on a connection part (metric, imperial, etc.).
SKU: n/a -
Instrumentation
Instrumentation ball valves
Instrumentation ball valves (instrumentation) have the following features:
- construction tested for performance at burst pressure and at test pressure, stem is blow-out proof;
- all parts are manufactured from certified materials and precisely finished;
SKU: n/a
