Shop
Showing 76–90 of 285 results
-
Industrial Hoses
Air and Water Hoses
Flexible hoses for water and air are designed to convey tap water, industrial water, sewage, cooling water, cold and hot water for washdown applications and to transfer compressed air (compressors, pneumatic tools, hose reels). The hoses are made of rubber, PVC, polyurethane, polyethylene and reinforced with textile braid or cord, with plastic or steel wire helix.
SKU: n/a -
Pneumatics
Air Treatment Units (FRL)
Atmospheric air is polluted with gases, vapour, particles of various chemical compounds but also with dust of various shapes, structure and density usually swirling in the air. The composition and concentration of pollutants in the atmospheric air depends on the location and time of the year. All of these pollutants enter pneumatic systems enriched with impurities brought in during compression, unless they are removed from the air before and after the compression. In pneumatics, compressed air is prepared in special devices, air preparation units.
SKU: n/a -
Pressure Transmitters
AKS 32 & AKS 33 Pressure Transmitter
Highly developed sensor technology means high
pressure regulation accuracy, a very important
factor in the precise and energy-economic capacity regulation of refrigeration plant.
Temperature compensation for LP and HP
pressure transmitters, developed specially for
refrigeration plant:
LP: −30 → +40°C (≤16 bar)
HP: 0 → +80°C (>16 bar)
Compatibility with all refrigerants incl. ammonia means less stock and greater application
flexibility.
Built-in voltage stabiliser, i.e. the AKS pressure
transmitters can be powered from an unregulated voltage supply of any output within
given limits.
Effective protection against moisture means
that the sensor can be mounted in very harsh
environments, e.g. in the suction line encapsulated in an ice block.
Robust construction gives protection against
mechanical influences such as shock, vibration and pressure surge. AKS sensors can be
mounted direct on to the plant.
No adjustment necessary. With the highly developed sensor technology and sealed gauge
principle, the accuracy of the factory setting is
maintained independent of variations in ambient temperature and atmospheric pressure.
This is very important when ensuring evaporating pressure control in air conditioning and
refrigeration applications.
EMC protection according to EU
EMC-directive (CE-marked)
UL approved
Polarity protected inputs.SKU: n/a -
Pressure Transmitters
AKS 32R_AKS 2050 Pressure Transmitter
Highly developed sensor technology means
great regulation accuracy.
Selective temperature compensation
Compatible with all refrigerants incl. ammonia
and CO2
Built-in voltage stabilizer
Effective protection against moisture
Robust construction gives protection against
mechanical influences such as shock, vibration,
and pressure surge
EMC protected in accordance with the EU
EMC-directive (CE-marked).
Polarity protected inlets
Output signal specially adjusted to ratiometric
A/D-converters.
Sealed gauge measuring principle
(pressure reference = 1013 mbar).
UL approvedSKU: n/a -
Pressure Switch
BCP Pressure switch
* Available as high and low pressure limiters as
well as pressure controllers
* Wide pressure range:
from low pressure BCP1 with narrow
differential to high pressure BCP7
* The fail-safe dual bellows enable premature
cut-out when fault occurs
* DIN plug mounted on the top of control for easy
electrical wiring
* Single-pole changeover switch (SPDT), switch
+ alarm
* Direct mounting on pressure connection or
wall mounting by means of a bracket
* Versions with automatic and manual resets
available
* Screw adjustments made on top of housing
* Manual reset for pressure limiters possible
only by means of tools
* Safety Integrity Level: SIL 2 according to IEC
61508:2010SKU: n/a -
Industrial Hoses
Camlock Fittings
CAMLOCK couplings make a group of very popular, recognized and reliable couplings for application in industry, in particular in the oil and gas as well as chemical industry. The specifications for the couplings were first laid down in US military standard MIL-C-27487 ( A-A-59326), they are also defined by the European standards EN 14420-7 (former DIN 2828). With their simple design, CAMLOCK couplings are very user friendly. To connect, an adapter is simply inserted into a coupler with the cam arms extended. To lock the adapter in the coupler both cam arms must be pulled down at the same time. The cam arms engage in the groove of the adapter and thus block and press it tightly. A flat elastomeric seal in the groove of the coupler ensures leak tightness. A safety pin in the holes of the coupler can provide additional protection against accidental opening of the cam arms and against disconnection.
SKU: n/a -
Industrial Hoses
Chemical Hoses
Chemical hoses are intended for liquid chemicals both organic and inorganic (acids and bases, salt solutions, paints and varnishes, solvents, etc.) They are used for the transfer of chemicals in chemical processing, transfer and loading/unloading of liquid chemicals (e.g. tank trucks, rail tankers, IBC containers), for diverse technological processes in the chemical, food, pharmaceutical industry, for numerous other industrial processes but also in laboratories. The inner hose layer must be sufficiently resistant to chemical corrosion.
SKU: n/a
