Pneumatics
Showing all 8 results
-
Pneumatics
Air Treatment Units (FRL)
Atmospheric air is polluted with gases, vapour, particles of various chemical compounds but also with dust of various shapes, structure and density usually swirling in the air. The composition and concentration of pollutants in the atmospheric air depends on the location and time of the year. All of these pollutants enter pneumatic systems enriched with impurities brought in during compression, unless they are removed from the air before and after the compression. In pneumatics, compressed air is prepared in special devices, air preparation units.
SKU: n/a -
Pneumatics
Other Pneumatic Drives
A rotary actuator is an actuator that produces a rotary motion or torque. Widely used (90° rotation angle) with ball valves, butterfly valves in all branches of the industry. 120° or 180° available on request. Single acting actuators use the pressure imparted by compressed air to create a driving force in one direction (usually out), and a spring to return to the „home” position. Double acting actuators use the force of air to move in both extend and retract strokes. They have two ports to allow air in for instroke and outstroke.
SKU: n/a -
Pneumatics
Pneumatic Actuators
Pneumatic actuators convert energy (typically in the form of compressed air) into mechanical energy (motion). Our offer include actuators with different piston diameter (from 8 mm to 200 mm) and different strokes (2800 mm for linear actuator and 5700mm for rodless linear actuators).
SKU: n/a -
Pneumatics
Pneumatic Hoses
Many different types of flexible hoses suitable for compressed air are described in the section Industrial hoses (first of all see hoses given in the following groups: hoses for water and air and general purpose hoses). This section presents hoses that are typical for industrial pneumatics and industrial automation.
SKU: n/a -
Pneumatics
Pneumatic Hoses
Many different types of flexible hoses suitable for compressed air are described in the section Industrial hoses (first of all see hoses given in the following groups: hoses for water and air and general purpose hoses). This section presents hoses that are typical for industrial pneumatics and industrial automation.
SKU: n/a -
Cleaning and washdown, Pneumatics
Pneumatic Valves
The main purpose of pneumatic valves is control of fluid direction and flow rate. The valve itself does not generate flow of the medium and act just as a distribution point for compressed air. Can be mounted in line, on the wall, on the cylinder (using special bracket) or in a series on a multiple or manifold base.
SKU: n/a
