404!
Nothing was found at this location. Try searching, or check out the links below.
Featured Products
-
Hose and Tube Assembling Machines
Hose Testing Benches
Testing of hydraulic hose assemblies with static pressure is a final hose assembly inspection for leak tightness and strength. For standard testing of hydraulic hoses 2 x working pressure is applied. Testing is conducted with static pressure and lasts for a dozens of seconds. Testing can be conducted on a part or 100% of certain production series.
SKU: n/a -
Hose and Tube Assembling Machines, Measuring systems and pressure gauges
Hose Skiving and Fitting Inserting Machines
Hose and Tube Assembling Machines, Measuring systems and pressure gaugesHose Skiving and Fitting Inserting Machines
Skiving of external or internal layer of certain types of hydraulic rubber hoses is needed before crimping takes place. For that purpose simple manual or semi-automatic skiving machines were developed
SKU: n/a -
Hose and Tube Assembling Machines
Hose Cutting Machines
Cutting machines, with electric drive, designed to cut hydraulic hoses with steel or textile braid as well as some industrial hoses. Equipped with standard (smooth) or toothed cutting blades with 2900 r.p.m. speed of rotation. Hose is manually (lever), pneumatically or hydraulically (foot-lever) pressed against the blade. The most important cutting machines parameters are: hose external diameter, type of hose to be cut, type of motor, drive and available accessories such as e.g. hose boss, cuts counter and length measuring unit. Automatic machines, that cut a certain length of the hose, are used for multi series production.
SKU: n/a
Product Categories
Popular Products
-
Hydraulics and High Pressure, Uncategorized
Hydraulic Fittings and Ferrules
Fittings for high pressure hoses are assembled on hydraulic hoses with the use of special ferrules. Designed especially for rubber hydraulic hoses and thermoplastic hoses but widely used for industrial hoses as well. Assembled by screwing (reusable) or on crimping machines (permanent connection). Our offer includes a wide range of fitting types – depending on a connection part (metric, imperial, etc.).
SKU: n/a -
Pressure Transmitters
MBS 3050 Pressure Transmitetr
• Designed for use in severe industrial
and hydraulic environments
• Resistant to cavitation, liquid hammer
and pressure peaks (MBS 3050)
• Enslosure and wetted parts of acid-resistant
stainless steel (AISI 316L)
• Pressure ranges in relative (gauge)
or absolute from 0 up to 600 bar
• All standard output signals:
4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V,
1 – 10 V
• A wide range of pressure and electrical
connections
• Temperature compensated and laser calibrated
• For use in zone 2 explosive atmospheresSKU: n/a -
Pressure Gauges
WIKA Model 736.51 Differential pressure gauge For very low differential pressures, from 2.5 mbar, with capsule element
Pressure GaugesWIKA Model 736.51 Differential pressure gauge For very low differential pressures, from 2.5 mbar, with capsule element
- Differential pressure measurement at measuring locations with very low differential pressures, for transparent, gaseous, dry, clean, oil- and grease-free media, also in aggressive environments
- ⊕ media chamber also suitable for corrosive media
- Process industry: Chemical industry, petrochemical industry, on/offshore
- Filter monitoring in ventilation and heating systems or in overpressure and clean rooms
- Differential pressure controlled monitoring of ventilator and blast pressures
- Differential pressure measurement at measuring locations with very low differential pressures, for transparent, gaseous, dry, clean, oil- and grease-free media, also in aggressive environments
- ⊕ media chamber also suitable for corrosive media
- Process industry: Chemical industry, petrochemical industry, on/offshore
- Filter monitoring in ventilation and heating systems or in overpressure and clean rooms
- Differential pressure controlled monitoring of ventilator and blast pressures
SKU: n/a
