You can get the best offer and express deliveries of Pressure Guages in top Countries like India, UAE, Qatar, Bangladesh, Sri Lanka, Nepal, Turkey, Iraq, Iran, Audi Arabia, cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad,Ahmedabad, Nashik, Indore, Bhopal, Vaodara, Surat, Vapi, Bharuch, Aurangabad, Rajahmundry, Visakhapatnam, Guntur, Dibrugarh, Bhilai, Raigarh, Delhi, Goa, Ankleshwar, Gandhinagar, Jamnagar, Rajkot,Panipat, Sonipat, Baddi, Dhanbad,Jamshedpur, Jharia, Belagavi, Ballari, Manglore, Hubli, Davangere, Palakkad, Kochi, Thiruvananthapuram, Calicut, Pithampur, Ujjain, Dewas, Nagpur, Rourkela, Angul, Bhiwadi, Coimbatore, Hosur, Ennore, Kalpakkam, Nandambakkam, Neyveli, Perambur, Kudankulam, Kanpur, Gajraula, Meerut, Unnao, Rudrapur, Haridwar, Durgapur, Kharagpur, Haldia, Darjeeling, Chittaranjan, Siliguri, Kalyani, Dum Dum, Dubai, Sharjah, Doha, Kathmandu, dhaka,Colombo
WIKA Model 432.25.2 Diaphragm pressure gauge For UHP (ultra high purity) applications, flow-through, nominal size 2″
- For pressure measurement in gaseous and liquid, also aggressive media for demanding high purity applications, also in aggressive ambience
- Semiconductor and flat panel industry
- Gas distribution systems
- Medical gases
- Hook-up-application
- Dead space free media chamber
- Excellent rinsing behaviour
- Helium leak tested, leak rate ≤ 10-9mbar · l/s
- Case and media chamber electropolished, surface roughness Ra ≤ 0.25 μm
- All ultra high purity gas fittings available
Compare
Based on 0 reviews
Be the first to review “WIKA Model 432.25.2 Diaphragm pressure gauge For UHP (ultra high purity) applications, flow-through, nominal size 2″”
Related products
-
Pressure Transmitters
EMP 2 Pressure transmitter
The high accuracy pressure transmitter EMP 2 is
designed for monitoring and control in marine
and industial applications and offers a reliable
pressure measurement, even under harsh
environmental conditions.
The flexible pressure transmitter programme
covers absolute or gauge (relative) versions
with zero and span adjustment with a 4 – 20 mA
output signal.
It has all the necessary marine approvals.
Special versions with integrated pulse-snubber
available, designed for use in hydraulic
applications with severe medium influences like
cavitation, liquid hammer or pressure peaks.
* For use in zone 2 explosive atmospheres.SKU: n/a -
Pressure Switch
BCP Pressure switch
* Available as high and low pressure limiters as
well as pressure controllers
* Wide pressure range:
from low pressure BCP1 with narrow
differential to high pressure BCP7
* The fail-safe dual bellows enable premature
cut-out when fault occurs
* DIN plug mounted on the top of control for easy
electrical wiring
* Single-pole changeover switch (SPDT), switch
+ alarm
* Direct mounting on pressure connection or
wall mounting by means of a bracket
* Versions with automatic and manual resets
available
* Screw adjustments made on top of housing
* Manual reset for pressure limiters possible
only by means of tools
* Safety Integrity Level: SIL 2 according to IEC
61508:2010SKU: n/a -
Pressure Transmitters
MBS 3050 Pressure Transmitetr
• Designed for use in severe industrial
and hydraulic environments
• Resistant to cavitation, liquid hammer
and pressure peaks (MBS 3050)
• Enslosure and wetted parts of acid-resistant
stainless steel (AISI 316L)
• Pressure ranges in relative (gauge)
or absolute from 0 up to 600 bar
• All standard output signals:
4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V,
1 – 10 V
• A wide range of pressure and electrical
connections
• Temperature compensated and laser calibrated
• For use in zone 2 explosive atmospheresSKU: n/a -
Pressure Switch
Danfoss 060-110191 Pressure Switch KP 1 Auto -0.2 To 7.5 Bar
Danfoss 060-110191 Pressure Switch KP 1 Auto -0.2 To 7.5 Bar
KP pressure switchs are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. KP pressure switches are also used for starting and stopping refrigeration compressors and fans on air-cooled condensers. A KP pressure switch can be connected directly to a single-phase AC motor of up to approx. 2 kW or installed in the control circuit of DC motors and large AC motors. KP pressure switches are fitted with a single-pole double-throw (SPDT) switch. The position of the switch is determined by the pressure switch setting and the pressure at the connector. KP pressure switches are available in IP30, IP44 and IP55 enclosures.
SKU: n/a
There are no reviews yet.