You can get the best offer and express deliveries of Pressure Guages in top Countries like India, UAE, Qatar, Bangladesh, Sri Lanka, Nepal, Turkey, Iraq, Iran, Audi Arabia, cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad,Ahmedabad, Nashik, Indore, Bhopal, Vaodara, Surat, Vapi, Bharuch, Aurangabad, Rajahmundry, Visakhapatnam, Guntur, Dibrugarh, Bhilai, Raigarh, Delhi, Goa, Ankleshwar, Gandhinagar, Jamnagar, Rajkot,Panipat, Sonipat, Baddi, Dhanbad,Jamshedpur, Jharia, Belagavi, Ballari, Manglore, Hubli, Davangere, Palakkad, Kochi, Thiruvananthapuram, Calicut, Pithampur, Ujjain, Dewas, Nagpur, Rourkela, Angul, Bhiwadi, Coimbatore, Hosur, Ennore, Kalpakkam, Nandambakkam, Neyveli, Perambur, Kudankulam, Kanpur, Gajraula, Meerut, Unnao, Rudrapur, Haridwar, Durgapur, Kharagpur, Haldia, Darjeeling, Chittaranjan, Siliguri, Kalyani, Dum Dum, Dubai, Sharjah, Doha, Kathmandu, dhaka,Colombo
WIKA Model 716.05 Differential pressure gauge Compact version NS 80, class 2.5 to 4.0, high overload safety
- Differential pressure measurement at measuring points with very low differential pressures and very high onesided or reciprocal overload
- For transparent, clean, non-sticky, non-aggressive media
- Control of ventilator and blast pressures
- Filter monitoring in ventilation and heating systems
- Level measurement in closed vessels
- Differential pressure measuring ranges from 0 … 16 mbar
- High working pressure (static pressure) and high overload safety up to 16 bar
- Numerous options for installation, connection form and connection location
Compare
Based on 0 reviews
Be the first to review “WIKA Model 716.05 Differential pressure gauge Compact version NS 80, class 2.5 to 4.0, high overload safety”
Related products
-
Pressure Switch
BCP Pressure switch
* Available as high and low pressure limiters as
well as pressure controllers
* Wide pressure range:
from low pressure BCP1 with narrow
differential to high pressure BCP7
* The fail-safe dual bellows enable premature
cut-out when fault occurs
* DIN plug mounted on the top of control for easy
electrical wiring
* Single-pole changeover switch (SPDT), switch
+ alarm
* Direct mounting on pressure connection or
wall mounting by means of a bracket
* Versions with automatic and manual resets
available
* Screw adjustments made on top of housing
* Manual reset for pressure limiters possible
only by means of tools
* Safety Integrity Level: SIL 2 according to IEC
61508:2010SKU: n/a -
Temperature Sensors and Transmitters
MBT 153 Temp Sensor
• For temperature measurement
where reliable, robust and accurate
equipment is required
• Temperature range -50 – 200 °C
• Short response times
• Pt 100 or Pt 1000 resistance element
• 2- or 4-wire connection
• MBT 120 sensor pocket availableSKU: n/a -
Pressure Switch
Danfoss 060-110191 Pressure Switch KP 1 Auto -0.2 To 7.5 Bar
Danfoss 060-110191 Pressure Switch KP 1 Auto -0.2 To 7.5 Bar
KP pressure switchs are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. KP pressure switches are also used for starting and stopping refrigeration compressors and fans on air-cooled condensers. A KP pressure switch can be connected directly to a single-phase AC motor of up to approx. 2 kW or installed in the control circuit of DC motors and large AC motors. KP pressure switches are fitted with a single-pole double-throw (SPDT) switch. The position of the switch is determined by the pressure switch setting and the pressure at the connector. KP pressure switches are available in IP30, IP44 and IP55 enclosures.
SKU: n/a -
Temperature Switches
KP Temp Switch
• Wide regulating range
• Can be used for deep freeze, refrigeration
and air conditioning plant
• Welded bellows elements mean increased
reliability
• Small dimensions.
Easy to install in refrigerated counters or
cold rooms
• Ultra-short bounce times.
This gives long operating life, reduces wear to
a minimum and increases reliability
• Standard versions with changeover switch.
Possible to obtain opposite contact function or
to connect a signal
• Electrical connection at the front of the unit.
Facilitates rack mounting
Saves space
• Suitable for alternating and direct current
• Cable entry of soft thermoplastic for cables
from 6 to 14 mm diameter
• Extensive and wide rangeSKU: n/a
There are no reviews yet.