You can get the best offer and express deliveries of Pressure Guages in top Countries like India, UAE, Qatar, Bangladesh, Sri Lanka, Nepal, Turkey, Iraq, Iran, Audi Arabia, cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad,Ahmedabad, Nashik, Indore, Bhopal, Vaodara, Surat, Vapi, Bharuch, Aurangabad, Rajahmundry, Visakhapatnam, Guntur, Dibrugarh, Bhilai, Raigarh, Delhi, Goa, Ankleshwar, Gandhinagar, Jamnagar, Rajkot,Panipat, Sonipat, Baddi, Dhanbad,Jamshedpur, Jharia, Belagavi, Ballari, Manglore, Hubli, Davangere, Palakkad, Kochi, Thiruvananthapuram, Calicut, Pithampur, Ujjain, Dewas, Nagpur, Rourkela, Angul, Bhiwadi, Coimbatore, Hosur, Ennore, Kalpakkam, Nandambakkam, Neyveli, Perambur, Kudankulam, Kanpur, Gajraula, Meerut, Unnao, Rudrapur, Haridwar, Durgapur, Kharagpur, Haldia, Darjeeling, Chittaranjan, Siliguri, Kalyani, Dum Dum, Dubai, Sharjah, Doha, Kathmandu, dhaka,Colombo
WIKA Model A2G-30 Inclined tube manometer For ventilation and air-conditioning
- For dry, clean, non-aggressive gases, usually air
- Monitoring of ventilators, blowers and filters in air-conditioning and clean room applications
- Easy to install and remove
- Leakage protection
- Easy-to-read scale
Compare
Based on 0 reviews
Be the first to review “WIKA Model A2G-30 Inclined tube manometer For ventilation and air-conditioning”
Related products
-
Temperature Sensors and Transmitters
MBT 5250_5260_5252 Temp sensor
• Gaseous or liquid media, e.g. air, gas,
vapour, water or oil.
• Up to 200 °C media temperature
(MBT 5250 and MBT 5260)
• Up to 200 °C or 400 °C media temperature
(MBT 5252)
• Pt 100 or Pt 1000 sensing element
• Can be used with 2- or 3-wire connections
• Gold plated male and female connector
(MBT 5250 and MBT 5260)
• MBT 5250 and MBT 5252 with interchangeable
measuring insert
• MBT 5260 with fixed measuring insert
• Available with built-in transmitter (MBT 5252)SKU: n/a -
Pressure Transmitters
MBS 3050 Pressure Transmitetr
• Designed for use in severe industrial
and hydraulic environments
• Resistant to cavitation, liquid hammer
and pressure peaks (MBS 3050)
• Enslosure and wetted parts of acid-resistant
stainless steel (AISI 316L)
• Pressure ranges in relative (gauge)
or absolute from 0 up to 600 bar
• All standard output signals:
4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V,
1 – 10 V
• A wide range of pressure and electrical
connections
• Temperature compensated and laser calibrated
• For use in zone 2 explosive atmospheresSKU: n/a -
Pressure Switch
Danfoss 060-110191 Pressure Switch KP 1 Auto -0.2 To 7.5 Bar
Danfoss 060-110191 Pressure Switch KP 1 Auto -0.2 To 7.5 Bar
KP pressure switchs are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. KP pressure switches are also used for starting and stopping refrigeration compressors and fans on air-cooled condensers. A KP pressure switch can be connected directly to a single-phase AC motor of up to approx. 2 kW or installed in the control circuit of DC motors and large AC motors. KP pressure switches are fitted with a single-pole double-throw (SPDT) switch. The position of the switch is determined by the pressure switch setting and the pressure at the connector. KP pressure switches are available in IP30, IP44 and IP55 enclosures.
SKU: n/a
There are no reviews yet.